Printer Friendly Tell a Friend

Smart-House/Dupline

Smart-House/Dupline
Highlights:

Code: UCM/Dupline

UCM Interface to Smart-House or Dupline by Carlo Gavazzi
Requires either  RS232F (RS232 Interface with Female DB9 connector) or or AUX485 RS485 interface, must be ordered separately
The Comfort system can be interfaced to Smart-house (also known as Dupline) by Carlo Gavazzi. This allows Comfort to control and monitor any of the 129 Dupline addresses (A1 to A8, B1 to B8, ...,  P1 to P8) by connecting to the CTRLX Smart-house controller (may also be known as Dupline Master Generator).
This  provides the following benefits to a Dupline system:
  • telecontrol through any telephone inside or outside the premises to control and monitor the status of Dupline devices
  • Able to send a commands to Set Output On/OFF, Set Input On/Off or activate Momentary Input for all Dupline addresses.
  • allows alarm inputs and alarm conditions to be linked to Dupline for full  integration of alarm and lighting.
  • allows Dupline switches to trigger Comfort Responses, allowing control of non-Dupline appliances like air-conditioners, home entertainment systems, and linking to all of Comfort's security and control functions.
  • Acts as a gateway to other systems e.g. KNX, C-Bus, Z-Wave, Velbus etc.
  • functions as a central controller for Dupline. Comfort is able to take action based on conditional logic, for example, when the time is between 7 PM and 7 AM and the security system is armed, and when the front door is opened, turn on the Living Room lights for 3 minutes.

Weight: 0.13 kg

Cytech Technology Pte Ltd

© 2015 Cytech Technology Pte Ltd